Bosch SMS50C12UK not starting – Error E:19

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch SMS50C12UK not starting – Error E:19

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 27, 2020 at 10:42 am #98079
    RichAB
    Participant

    Hi All. I have a Bosch SMS50C12UK Dishwasher. It’s giving me error code E:19 when turning on and not starting. I read elsewhere that this may be a problem with the heat exchanger solenoid. I’ve replaced this (old one was giving me resistance of 16 ohms, new one is 7K ish), but the error is still there. Haven’t looked at any of the power/control PCBs yet but would appreciate any pointers on what to look for next

    Thanks

    July 27, 2020 at 7:52 pm #470794
    electrofix
    Moderator

    well if the old one gave 16 ohms that would worry me. at that resistance it would blow the control traic on the board

    Dave

    July 28, 2020 at 2:07 pm #470795
    RichAB
    Participant

    Thanks. I’ve now had a look at the PCB under the microscope. Nothing obviously burnt out. Where would I find the Triac? All I see on the board is a couple of darlington arrays, a 5V reg and what looks like a micro..

    July 28, 2020 at 7:55 pm #470796
    electrofix
    Moderator

    are you looking at correct pcb, at bottom rear where the mains plug goes in ?

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.