Smeg fan element

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Smeg fan element

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 29, 2005 at 3:10 pm #9847
    admin
    Keymaster

    The fan element on our Smeg oven has gone – literally exploded! Have looked at replacing it myself – current one seems to be secured by 2 x hex bolts, althought these seem to be a strange size (between 5mm & 6 mm) and are extremely shallow so can’t get a grop on them with any of my sockets. Assuming I can get the old one out, then need to order a new element, assuming it’s not stupidly expensive like what Smeg wanted for the pcb on dishwasher. Any advice appreciated!

    Thanks.

    May 29, 2005 at 6:19 pm #136348
    Penguin45
    Participant

    Re: Smeg fan element

    The element is secured from the rear of the oven wall by nuts. The SMEG element required may well be in shop@ on the site. If you would post the model number of your appliance we would be able to check.

    Power off if you plan to do this yourself………….. :plug:

    Regards,
    Penguin45.

    May 29, 2005 at 8:19 pm #136349
    admin
    Keymaster

    Re: Smeg fan element

    That’s great, thanks for that. Had a quick look & seems pretty straightforward.
    The model no. is SE398X/1

    Thanks again.

    May 29, 2005 at 9:38 pm #136350
    Dave_Conway
    Participant

    Re: Smeg fan element

    As Penguin suggests, it is in the shop@ here: 😀

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=332

    Dave.

    June 2, 2005 at 8:02 pm #136351
    steveplayer
    Participant

    Re: Smeg fan element

    Thanks for the help guys. Ordered the element & it arrived very promptly.
    Install was easy, but when switched on heard a small pop & power went off, plus a little smoke. Double checked everything was connected ok, & it was. However discovered a small blue component that is burnt out – hopefully a result of the original element blow, but no idea what it is. Burning smell appeared to be coming from this too. It’s a small blue barrel, about 1/2 inch diameter, has just one wire either side. Only markings on it are;

    Ty60
    10/250~
    16/250~ T210

    Any ideas?
    Can supply a digi pic if that helps.

    Cheers.

    June 2, 2005 at 8:38 pm #136352
    Dave_Conway
    Participant

    Re: Smeg fan element

    It’s the oven thermal cut-out Steve, part number 818760550 at £12.00 inc VAT and delivery.

    If you want one let me know by email to authorise, I’ll have all your details from the element order.

    Special order this one so it may take a few days to get, 5-7 working I would estimate.

    Dave.

    June 2, 2005 at 9:53 pm #136353
    steveplayer
    Participant

    Re: Smeg fan element

    Thanks Dave, have sent you email to confirm order.

    Cheers.

    June 2, 2005 at 9:55 pm #136354
    Dave_Conway
    Participant

    Re: Smeg fan element

    Got it 😀

    Dave.

    June 17, 2005 at 10:52 pm #136355
    steveplayer
    Participant

    Re: Smeg fan element

    All sorted now – big thanks to Dave & Penguin for a fine service.
    Cheers guys!

    June 17, 2005 at 11:16 pm #136356
    Dave_Conway
    Participant

    Re: Smeg fan element

    Thanks for letting us know Steve :tup:

    Dave.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.