indesit dryer IDCL85BH UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit dryer IDCL85BH UK

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • November 3, 2020 at 12:25 pm #98576
    tash
    Participant

    hi has anyone had issues with the drum jamming on my these dryers. i’ve had 2 fairly new condenser dryers with snapped belts.i found the rear felt seal had somehow stuck to the drum and stuck solid. are these coated with ptfe liquid too like the old felts
    cheers

    November 3, 2020 at 1:36 pm #472912
    electrofix
    Moderator

    checked for any tech bulletins on this fault, none listed

    Dave

    November 3, 2020 at 5:54 pm #472913
    tash
    Participant

    strange that then. thanks for looking

    November 4, 2020 at 10:47 am #472914
    murv
    Participant

    As far as I am aware the surface of the rear felt seal should be coated with PTFE part no C00379852

    Murv…

    November 5, 2020 at 9:32 pm #472915
    tash
    Participant

    cheers i thought it might be . i’ll try that next time

    November 5, 2020 at 10:02 pm #472916
    tash
    Participant

    does anyone know the part no for the rear seal. on connect it says 17mm only for heat pump model and not available for heater version. surely that can’t be right . what’s the difference in sizes . cheers

    November 5, 2020 at 10:49 pm #472917
    electrofix
    Moderator

    looks like panel

    Dave

    November 6, 2020 at 1:21 pm #472918
    murv
    Participant

    While available use C00258640 Black foam seal. The old Blue foam seal C00145648 was updated to the black one as part of the the fire modification.

    Assume it’s been modded? If not then a new back panel kit or a new dryer is free.

    Murv…

    November 9, 2020 at 7:30 am #472919
    tash
    Participant

    thanks for your help

    February 26, 2021 at 4:34 pm #472920
    tash
    Participant

    still having issues with these sticking. seems stupid to have to fit a full panel. surprised no one else has had this problem. looks like the glue melted

    February 26, 2021 at 6:25 pm #472921
    roy1
    Participant

    I have had customers drying cloths,overalls etc which are still contaminated with a solvent it can melt the glue or foam.

    February 26, 2021 at 6:39 pm #472922
    tash
    Participant

    yes strange. this ones only had light use elderly couple sheets usually 2018 machine.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.