Smeg SUK62MFX5 Ignition Block Replacement

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Smeg SUK62MFX5 Ignition Block Replacement

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 5, 2020 at 12:54 pm #98590
    Splatts
    Participant

    Hi, I have a Smeg SUK62MFX5. The ignition has failed on all gas rings, and I suspect a faulty ignition block. It’s not at all obvious how to replace the block, so any instructions would be really helpful. Thanks

    November 5, 2020 at 1:07 pm #472969
    electrofix
    Moderator

    you have to find where they have sited the unit but if you have to remove gas components to access it needs to be done by a gas safe engineer

    Dave

    November 5, 2020 at 1:10 pm #472970
    don
    Moderator

    Hi

    While this maybe a DIY fix for some we would not recommend it as you will have to disturb to some degree gas couplings in order to access the part needed. Our forum rules do not allow us to give advice on gas or dual fuel cookers. A fuller explanation can be found here we will always direct enquiries like yours to a registered Gas Safe engineer.

    Don

    November 5, 2020 at 6:53 pm #472971
    Splatts
    Participant

    Thanks for the advice. There is no obvious way in and I certainly do not wish to mess with the gas bits. Best left to the experts.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.