Bush dishwasher fault repair

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bush dishwasher fault repair

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 10, 2020 at 10:29 am #98612
    Chickc4
    Participant

    I have a bush dishwasher wqp6-3202-fs11, if i do a big wash the start/reset light flickers and a beeping comes on, I’ve been told if you angle it 45 degrees water will pour from the bottom as a problem of overflow, so once the water has drained the light stops flickering, but if i do a small wash (rapid or soak) it works fine and drains completely, I’ve read it could be the flip switch or the pump maybe not working, but need it diagnosed properly…

    November 10, 2020 at 11:30 am #473051
    electrofix
    Moderator

    its hard to say without looking at it

    if you have water appearing in the base you have a leak. Since this could be from various places someone would have to take some of the covers off and watch while it was running and look for drips

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.