Sharp es hdb8147w0

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #98726
    craig mossom
    Participant

    Hi all. I have a sharp washer dryer that stats a drying cycle for about 5 mins. Doesn’t count down and just stops. Stats are fine. Reset stat is OK. Elements are getting hot. Any ideas

    #473551
    electrofix
    Moderator

    i would check air flow. you need to strip and check the fan and condensor is clear of fluff

    Dave

    #473552
    craig mossom
    Participant

    I checked the bottle at the back and opened the element it had a bit of fluff but I cleared it out.

    #473553
    electrofix
    Moderator

    tech from these is almost non existant so i have no way finding out what contols the dryer

    check water inlet valve as a long shot but after that its more guess work

    dave

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.