***Bosch dishwasher BLOWN board***

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › ***Bosch dishwasher BLOWN board***

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 6, 2020 at 10:11 pm #98763
    Dean Rogers
    Participant

    Hello,
    I have a problem with my Bosch model SMS40A18G /34 dishwasher pump.
    Basically it got clogged with some plastic and after taking out the pump I removed the plastic and set it back up to test.
    When I plugged it back in the board done that (picture).
    I assume it’s either the pump has burnt something out or some water got into somewhere although it all looked dry underneath.

    I can purchase a board for around £115-£120 but before doing that just wanted to see if anyone has had any experience with this type of problem as I could buy a board only for it to blow again and I’m back to square one.

    Whilst I’ve got the sides off etc and it’s set up in the garage thought I would check on here and I also have a fire extinguisher in there….what could possibly go wrong?

    Cheers Dean

    December 6, 2020 at 10:12 pm #473723
    Dean Rogers
    Participant

    I would put photos up but they’re all over the 2mb allowance so they won’t post.

    December 6, 2020 at 10:41 pm #473724
    Dean Rogers
    Participant

    Tried to post photos several times now but no go.
    Why the 2mb limit?
    I’ve compressed them as well but it just comes up
    with only 19.5kb available.

    December 6, 2020 at 11:43 pm #473725
    electrofix
    Moderator

    2mb limit so save server space and money. keeps the cost of running the site

    photos are easy
    host them on another site like google pics then post a public link

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.