Hotpoint SUTCD97B6GM dryer

Home Forums Trade Technical & Spare Parts Forums Hotpoint SUTCD97B6GM dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #98794
    delta01
    Participant

    Hi this dryer apparently makes a squealing noise after 30/40 mins when i called it of course would not do it ,however i noticed also that the pump was running continuously , i had this once before and found i could rewire the pump directly through the micro switch ( as earlier models ) which worked fine, i appreciate the problem was caused by the pcb anyway has anyone had a noise problem or fault of the pump running continuously on this or similar late models thanks John

    #473819
    kaibart
    Moderator

    Its the pump going noisy ive changed a few

    #473820
    delta01
    Participant

    Thanks v much it should not continuously though should it

    #473821
    electrofix
    Moderator

    delta01 wrote:Thanks v much it should not continuously though should it

    some do run all the time which is why they wear

    Dave

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.