- This topic has 2 replies, 3 voices, and was last updated 5 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Evening.
the washer has stopped spinning. There is no error code. Filter is cleared. When the back was taken off the drive belt was on the floor. Reattached – was extremely tight and difficult to fit – but same issue. Have a replacement drive belt on order. Is there anything else I should be considering?
thanks in advance.
Could be wrong but isn`t this thing a Chinese made Haier? 11 so called parts only listed on Partmaster so it all seems likely it is Chinese. Could be drum pulley but doubtful as if the center hole or bolt goes loose it`ll make a clicking noise when revolving the drum. More likely that you have a sock caught under the drum which pinged off the belt, is the drum is stiff to turn? Are the drum bearings still ok.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.