Beko DRVS62W- no functionality whatsoever yet power to switch

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Beko DRVS62W- no functionality whatsoever yet power to switch

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 24, 2020 at 4:47 pm #98837
    BobG
    Participant

    Our rarely used Beko has no functionality at all. Have checked that there is power to the switch and that the switch is functioning ( has continuity) PCB looks absolutely okay with no marks or obvious issues. Went from working one week then nothing. No intermittent issues. Have tried reset by holding in start/pause button but no change. Any clues anyone?

    December 24, 2020 at 5:06 pm #473971
    electrofix
    Moderator

    as long you have live and neutral to the board then the board is most likley faulty

    Dave

    December 26, 2020 at 11:07 am #473972
    BobG
    Participant

    So hopefully a simple case of spending £60 on a new board and fitting it! Is the swap straight forward and plug and play? Replacement dryer £200.

    Bob

    December 26, 2020 at 12:05 pm #473973
    electrofix
    Moderator

    sounds like a plan
    there are a few used ones on Ebay

    also if you have any freinds into electronice you may be able to repair the board

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.