Neff induction hob calibration

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff induction hob calibration

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 5, 2021 at 3:45 pm #98896
    don
    Moderator

    So we have a lovely Neff T59FT50X0/02 FD 9710 induction hob which came in with keypad locked. We replaced the control PCB module, hob has now come out of key lock. We can get front right to function but crappy leaflet which came with module says the round magnet needs to be calibrated to each plate.

    Anyone have any idea on how to calibrate these rascals?

    TIA

    Don

    January 5, 2021 at 10:59 pm #474212
    electrofix
    Moderator

    glad you posted this but cant help

    went to a siemans one today with a poss power board failure, if they need calibrating i will knock it back as board is almost £300

    Dave

    January 26, 2021 at 7:30 pm #474213
    don
    Moderator

    Just to close this thread, The new power board does indeed need calibrating and after some help from BSH it is a case of pressing certain buttons in a sequence. Trouble is the sequence varies depending on the hob range.

    Don’t think we will be entertaining another one any time soon.

    Don

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.