Whirlpool ADG332 S WH

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADG332 S WH

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 18, 2021 at 5:09 pm #98980
    antman08
    Participant

    I am trying to repair the above dishwasher.
    When u reset and start it .. it tries to fill then pump then fill then pump continuously. Banging
    on off button seems to flash on off on off so could be 1 flash code.
    sn is 33 0147 020901
    854233215510.
    M/ c is in very good condition
    Has anyone seen this fault .. I read i could be thermistor .
    I have changes the black circlular press. Switch
    thanks phil

    January 19, 2021 at 12:07 am #474583
    electrofix
    Moderator

    check the wires at the bottom of the door as they can break over the years with constant bending

    beware dont go at it too quickly as often the wires are the same colour and if you have more than one broken you need to know which connects to which

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.