Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SPS40E22GB/32 dishwasher emptying and filling simultaneously
- This topic has 8 replies, 2 voices, and was last updated 5 years, 2 months ago by
jontymox.
-
AuthorPosts
-
January 22, 2021 at 2:10 pm #99006
jontymox
ParticipantGood afternoon everyone,
I’ve visited the above dishwasher earlier today, and replaced the impellor jug/flow sensor, which I realise is a fairly common cause of the above symptoms.
However, fault remains.
On a new cycle, the dishwasher drains and fills normally, then the check water light illuminates, and the unit drains and fills continuously.
The d/w drains perfectly, the internal drain hose from the pump is clear, as is the matrix, and I’m now wondering if the board is faulty?
Please could someone let me know if I should be checking/testing other areas?!
jontyJanuary 22, 2021 at 3:00 pm #474666electrofix
Moderatorhave had wires from impellor jug eaten by mice before today so check wires back to board and the connection to the board
Dave
January 22, 2021 at 5:45 pm #474667jontymox
ParticipantWill do Dave,
Thanks yet again for your help; I’ll return early next week to this problem.
jontyJanuary 26, 2021 at 9:27 am #474668jontymox
ParticipantWiring to and from flow sensor to board good, so suspect board sending and receiving incorrect “messages.”
Has anyone found the board to be at fault for this problem, as customer would like d/w repairing?
jontyJanuary 26, 2021 at 10:05 am #474669electrofix
Moderatorhave had bosch dishwashers with that problem but not on that board
Dave
January 26, 2021 at 10:26 am #474670jontymox
ParticipantWill bite the bullet and try new board.
January 26, 2021 at 10:40 am #474671electrofix
Moderatorin the complete absence of bosch tech
this is the closest i can findworth a quick read
https://www.manualslib.com/manual/958098/Bosch-She4am12u.html#product-SHE4AM02UC – Ascenta Dishwasher With 4 Wash Cycles
Dave
January 29, 2021 at 5:04 pm #474672jontymox
ParticipantHave had a look at the info’ Dave, but will probably have to admit defeat on this problem, as I renewed the board earlier today and the fault remains.
I just don’t know why, and feel the need to cut my losses….
Thanks again for your help.
jontyJanuary 29, 2021 at 11:28 pm #474673electrofix
Moderatorjontymox wrote:Have had a look at the info’ Dave, but will probably have to admit defeat on this problem, as I renewed the board earlier today and the fault remains.
I just don’t know why, and feel the need to cut my losses….
Thanks again for your help.
jontyproblem with these sort of faults is you really want to know why too
Dave
-
AuthorPosts
- You must be logged in to reply to this topic.
