- This topic has 4 replies, 3 voices, and was last updated 5 years, 1 month ago by
.
-
Posts
-
I’ve checked the wiring to the main pcb, all was good – so because the display section is part of the main pcb, I ordered a replacement……
Fitted main pcb with all confidence but it still didn’t light up, so I’m quite confused…… there is a block with red wires near the display screen that go to the smaller pcb behind it so could that be the cause? I’ve not had this fault before weirdly, so your help would be welcome please.
PNC: 914606038-01
Pcb fitted/tried : 973914606038011 (programmed)I have seen the dryer PCB cause a no display on a similar model machine, you can try disconnecting it to see if it lights up correctly.
Jem
electrofix wrote:try disconnecting dryer heater
common fault makes display light up but no figures on screen
Dave
Hiya Dave – I didn’t think to try that…. but there’s hardly any light at all coming up on the display let alone figures!!
Hollytree_Technical wrote:I have seen the dryer PCB cause a no display on a similar model machine, you can try disconnecting it to see if it lights up correctly.
Jem
Thanks Jem – I was thinking this actually because of the block with red wires going from the main pcb to the smaller dryer pcb….. Maybe that is the answer??
- You must be logged in to reply to this topic.