Bosh stuck on anti crease cycle, beeps and won’t start

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Bosh stuck on anti crease cycle, beeps and won’t start

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 21, 2021 at 10:08 am #99179
    Paigntontim
    Participant

    Hi all

    new to this so apologies if this is in the wrong thread….


    model number wte84106gb

    yesterday turned the machine on as normal and my bosch classic 7 tumble dryer. Does not matter which cycle this is on the anti-cheese/end flashes red and beeps. When I try and push start nothing happens

    I have taken the back off and side to clean out the water pump area this is clean, I have tested the heating element as seems fine.

    any advice would be much appreciated

    thanks

    February 21, 2021 at 10:19 am #475277
    electrofix
    Moderator

    i would check door switch

    try opening and closeing the door a few times. if it goes change door sw

    Dave

    February 21, 2021 at 11:23 am #475278
    Paigntontim
    Participant

    Thanks Dave tried this and still the same

    cheers
    Tim

    February 21, 2021 at 12:15 pm #475279
    electrofix
    Moderator

    well i would access the door switch to check it with a meter

    has this unit got a child lock ?

    dave

    February 21, 2021 at 4:37 pm #475280
    Paigntontim
    Participant

    Hi Dave

    done as you said and reassembled and now working perfectly

    thanks for all your help, great forum btw

    cheers

    tim

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.