- This topic has 9 replies, 7 voices, and was last updated 20 years, 10 months ago by
.
-
Posts
-
Having replaced plenty of carbon brushes on these motors in the past , I`ve never before had the thermal cut out in the motor end frame go open circuit but I have now. 🙁
The motor tests ok and the armature cleaned up nice with a comm stick.
Bosch website only gives complete motor as spare but I`m assuming there is an end frame available for this motor.Part number please .Don`t suppose the plastic holder inside the end frame (which houses the cut out) is available seperately. 💡
Thanks
Bryan
Re: Bosch Motor WFF1401GB/01
There doesn’t appear to be one for this motor, not from the usual sources anyway, I’ve checked, Connect, Washvac, Qualtex, Maddocks and SEME none of them list one.
BSH-MAN or boro may be able to advise hopefully 😀
Dave.
Re: Bosch Motor WFF1401GB/01
Thanks for that Dave and as you say hopefully the Bosch guys may have a cost effective solution.
New motor £120 plus vat 🙁 from Connect (to me)
Bryan
Re: Bosch Motor WFF1401GB/01
If you have the space it’s worth hanging onto a few knackered motors to rob such bits when you need them. I’ve always done this for TOCs, tacho coils and magnets etc.
Re: Bosch Motor WFF1401GB/01
Bryan wrote:New motor £120 plus vat 🙁 from Connect (to me)
Yep, same price to me, Washvac’s a bit cheaper at £111 (if you can find their site :lol:)
Qualtex £108 if you want one, let me know 😀
Dave.
Re: Bosch Motor WFF1401GB/01
Sorry but the rear end isn’t available for that motor,brush set only I’m affraid.
As Phidom said the only alternative to a new motor would be to butcher an old one 🙁
Can’t say I’ve ever had cause to change thermals on a motor,as we would replace whole motor for a fault like that.
Re: Bosch Motor WFF1401GB/01
It’s a good model and, if in good nick, is worth a new motor. :tup:
The end frame changes gave way to just brush change about the time of this appliance entering the market.Re: Bosch Motor WFF1401GB/01
Where have you guys been all weekend……… it`s ridiculous 😆
Seriously, thanks for everyones input on this one. :tup:
Bryan
Re: Bosch Motor WFF1401GB/01
Sorry but the rear end isn’t available for that motor,brush set only I’m affraid.
The end frame off the earlier motor will fit this motor, part number 096331, listed at £57.28 on http://www.bshappliancecare.co.uk, end frame includes new brushes.
regards
Sparkey
- You must be logged in to reply to this topic.