Rangemaster 110 classic induction E4

Home › Forums › Trade Technical & Spare Parts Forums › Rangemaster 110 classic induction E4

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 5, 2021 at 4:45 pm #99508
    DPDOM
    Participant

    Hi Chaps
    I have 2 zones on this induction hob showing E4. I have tried the configuration process but with no luck.
    Does anyone have any tips on what the problem is?

    Regards

    Dave

    May 5, 2021 at 10:42 pm #476704
    electrofix
    Moderator

    are you sure you used the correct proceedure ?

    Dave

    May 6, 2021 at 4:29 pm #476705
    DPDOM
    Participant

    Hi Dave

    The original problem was E4 on both left rings. If I configure as per the Instructions then it doesn’t want to configure the first 2. I can configure in a different order fine but E4 still persists.
    Parts are expensive so want to try and get diagnosis right.

    I don’t normally do induction for this reason but long time customer talked me into it.
    Any help would be appreciated.

    Dave

    May 6, 2021 at 11:10 pm #476706
    electrofix
    Moderator

    did you see the induction training material given out at the last conference ?

    according to that 2 rings giving E4

    1 safety pcb on control unit burnt out

    or

    2 no communication between control unit and plate

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.