Beko WDR7543121 Board

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WDR7543121 Board

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 14, 2021 at 10:30 am #99790
    subs
    Participant

    Hi, I replaced the main power board on this machine a couple of months ago for the usual machine completely dead issue. Tried changing the small diode on board first but didn’t work this time. Any way machine was working fine but now got call from customer and sent video (tried to upload here but too large) of machine filling with water but the display is bleeping as the water temperature selection light continuously changes from one to another from top to bottom and back to top again as well as the time of wash changes with each temperature selection that lights up. Non stop and and unable to stop it by pressing any buttons. Weird. Power board gone again or display board now?

    Subs

    July 14, 2021 at 11:19 am #477882
    electrofix
    Moderator

    could be a stuck button.

    can get you the service info if you need it

    Dave

    July 15, 2021 at 5:52 am #477883
    kaibart
    Moderator

    Double check the front ntc on dryer duct the wiring to it they do have trouble with these

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.