Zanussi cooker bottom oven no fan heat or light

Home Forums Public Support Forums Help And Support Cooker And Oven Forum Zanussi cooker bottom oven no fan heat or light

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #99809
    Stephen Nash
    Participant

    Hi please help I’m new to this forum and I’m having problems with my grandparents zanussi electric cooker model ZCV48300BA the problem is with the bottom oven the grill/top oven and hobs work fine but the bottom oven feels like it has no power. No fan no heat and no light. The clock works and is set correctly. any help please

    #477991
    tubafan
    Participant

    Is the timer definitely set for manual cooking, as that would stop the bottom oven from working?

    #477992
    Stephen Nash
    Participant

    I have checked the timer and clock and it is set for manual cooking

    #477993
    electrofix
    Moderator

    the clock is still the first and easiest thing to try

    try turning off at the wall. wait a few munutes, then turn back on and reset clock time etc

    see what happens

    if not that it gets more complex as an internal component has probably failed

    Dave

    #477994
    Stephen Nash
    Participant

    The cooker was switched off at the wall over night I reset the clock this morning and tried the oven on timed and manual cooking and it didn’t work.

    #477995
    electrofix
    Moderator

    well from here it depends on your skill level as the oven would have to be opened and the internal components inspected and tested to find the cause

    Dave

    #477996
    Stephen Nash
    Participant

    Lovely, I’m ok with DIY but don’t really know what I’m looking for to find a fault with internal cooker parts

    #477997
    electrofix
    Moderator
    #477998
    Stephen Nash
    Participant

    Can anyone suggest what to look for or if it’s worth just replacing

    #477999
    electrofix
    Moderator

    first thing i would check would be the switch which is below the knob. look for burnt out contacts

    problem is it look like it may no be to easy to access on that model

    Dave

    #478000
    Stephen Nash
    Participant

    Thank you I will check that, on another forum It was suggested to check the terminal block is this something that can cause this, I would of thought that if it was this then nothing would work.

    #478001
    electrofix
    Moderator

    Stephen Nash wrote:Thank you I will check that, on another forum It was suggested to check the terminal block is this something that can cause this, I would of thought that if it was this then nothing would work.

    its worth a look, every circuit in the cooker is fed off the block. if the wire to the oven has failed it wont work

    although i say its worth a look i think the clock would have gone off as well

    Dave

    #478002
    Stephen Nash
    Participant

    Thank you will take a look tomorrow

Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.