Bosch WAE2406GB/31 A/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAE2406GB/31 A/W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 19, 2021 at 2:22 pm #99818
    rocker
    Participant

    Replaced worn carbons in motor……(Rinse light on)…..tried to reset Pcb… (Turn to 6 0clock wait second turn to 7..press spin (there is no spin button) so unable to reset…can anyone please help. John

    July 19, 2021 at 3:48 pm #478025
    electrofix
    Moderator

    try
    2) Set program selector to OFF position
    Wait for at least 2s
    3) Set program selector switch to position 15 while the Start/Pause button is pressed until display is active
    4) Release Start/Pause button

    Dave

    there are a few others

    Dave

    July 19, 2021 at 4:36 pm #478026
    rocker
    Participant

    Cheers Dave …just in case…where can I find others if needed…

    July 19, 2021 at 4:41 pm #478027
    rocker
    Participant

    Cheers Dave..It worked…well done….John

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.