Panasonic Combi microwave Quartz elements replacement

Home › Forums › Public Support Forums › Help And Support › Other Appliances › Panasonic Combi microwave Quartz elements replacement

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 2, 2021 at 1:02 pm #99879
    martfoxy
    Participant

    I am trying to replace the quartz elements on my Panasonic NN-A574SBBPQ combi microwave. The replacement elements don’t have a spade connector at both ends like the original. I understand it uses a connector bar instead to join the two elements. However also the end of the element is a different shape to the original so won’t fit into the bracket. Has anyone come across this problem and found a solution. Thank you.

    August 2, 2021 at 2:16 pm #478279
    electrofix
    Moderator

    first off are you certain you have the correct part ?

    what part number have you been sent ?

    did a quick check and one of my main suppliers shows your element obsolete

    Dave

    August 3, 2021 at 8:33 pm #478280
    martfoxy
    Participant

    The part number I was sent is Z630G7X50BP. I presume it isn’t the right part if the correct one is obsolete.

    Thanks

    Martin

    August 3, 2021 at 9:15 pm #478281
    electrofix
    Moderator

    martfoxy wrote:The part number I was sent is Z630G7X50BP. I presume it isn’t the right part if the correct one is obsolete.

    Thanks

    Martin

    I would say yes its not correct. unless you can fit them mechanically, if yes then the electric connections could be sorted but if they dont fit then your sunk

    unless you can find a scrap microwave on ebay with a good grill element ( bit of a tall order )

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.