- This topic has 4 replies, 2 voices, and was last updated 4 years, 8 months ago by
.
Viewing 5 posts - 1 through 5 (of 5 total)
-
Posts
-
FD 9506
Hi all I have an intermittent E18 fault on my dishwasher, I’ve checked the drain hose and it’s clear and I’ve cleaned all filters including the one in the Aquastop hose inlet, I’m getting the fault toward the end of cycle never at beginning, and left with water in the end of machine…any ideas thanks Shane
E18 is showing as a fill error in the user manual
could be all sorts of thing to do with water flow like low pressure, tap no on properly, blocked filter. could also be things in the machine like the water flow sensor
Dave
Thanks Dave I’ve good water pressure between 2-2.5 bar, I’ve cleaned all the filters and I’m going to strip it down later and check the inlet hose / flow meter for any calcification, cheers Shane
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.