- This topic has 1 reply, 1 voice, and was last updated 4 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
hi, my old hotpoint ctd80 dryer stops with the error f-10. any ideas of the fault and if its worth fixing would be apprectated, cheers
ive reset the thermostat as mentioned online, running it to test now.
un screw this from the back panel, and at the top you will see three thermostats. There is a brown one with a small hole in the middle, if you use a pin and press in, you should hear a click. This resets the thermostat and you should be able to use the drier again.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.