- This topic has 4 replies, 3 voices, and was last updated 4 years, 7 months ago by
.
-
Posts
-
Attended this washer, seems that it is not filling up with enough water. Too little for mixed load and too much for Aqua plus setting. I am thinking pressure switch being the culprit? I never come across Bosch washers with pressure switch issue before so this will be the first.
unless I overlooked something else?
no never had this either. does it follow through to the rest of the programme? is the rinse level low as well ?
well its cheap enough at £6.48 from Bosch so its worth a try
Dave
Runs through the program fine, just water level being the issue. I blew down the tube to clear any junk, could hear bubbling and no resistance when I blew it down. It was low all the way through including rinse. No kinks on water hose, full blast of water entering the machine.
The insulation reading was a little low at 11 mohm but it is more likely that the motor needed cleaning in the distant future and it does not appear to have any impact on the wash load. Will keep you posted.
- You must be logged in to reply to this topic.