- This topic has 6 replies, 4 voices, and was last updated 4 years, 7 months ago by
.
-
Posts
-
Model: 3RLEQ8000 OKQ2 S.No: MS0901109
The machine is not starting. I have checked the door switch and the start switch. The start switch relay energises and makes contact.
Can anyone provide a wiring diagram for this machine?mikehha wrote:try the overload cut out on the heater duct
Looks like the thermal fuse on the heater duct was to blame.
Does anyone have a part number for this?
I’ve looked on Connect but it doesn’t list the full model number and the part shown for just “3RLEQ8000” is the wrong shape. The one on the machine is rectangular.
Searching for “Whirlpool thermal fuse” brings up the 5031681018133 (among other things) which is rated at 91ºC whereas the above wiring diagram shown with 2 blue wires connected, it’s rated at what appears to be T96ºC.Thanks.
diagram above is also the shortened model no
91 degrees looks correct
see
https://www.partadvantage.com/lookup/5990Dave
electrofix wrote:diagram above is also the shortened model no
91 degrees looks correct
see
https://www.partadvantage.com/lookup/5990Dave
Not seen that site before, very useful.
Perfect, thanks Dave.
- You must be logged in to reply to this topic.