Hotpoint WMF720: F-11 error code.

[iadom]

Re: Hotpoint WMF720: F-11 error code.

TBH those numbers mean little or nothing to me, too small for my ageing eyes to see. 😆
I use the official Partfinder software that the Indesit Company charges me a small fortune for every six months. 🙁

The part number you have been given is for a WMF720PUK RA

Also made in Poland but with different electronics.

[Roy22]

Re: Hotpoint WMF720: F-11 error code.

Well, I hope they’ll take it back then. I appreciate electronics may differ, but I thought this was just a switch, and I would have hoped that one version of this switch performed pretty much the same as the next one. I assume the wrong switch is already in transit to me, so I suppose I’d better wait for it’s arrival before I tell them it’s wrong, or they won’t believe me. Pretty damn poor all round, really.

[iadom]

Re: Hotpoint WMF720: F-11 error code.

The correct switch is listed as 1.L 85-60 ANTIOW.330

The one you have ordered is listed as R2.5 85/60 OVERFLOW 330.

Water levels or internal connections could differ.

[Roy22]

Re: Hotpoint WMF720: F-11 error code.

I’ve found web pictures for both (different company), and it looks like the one I ordered:

http://www.buyspares.co.uk/pressure-switch/product.pl?pid=1951543&query=C00259298

And not like the alternative you list:

http://www.buyspares.co.uk/pressure-switch-1-l-85-60-antiow-330/product.pl?pid=1615462&query=C00145174

Is there anyway your software could be wrong?

[iadom]

Re: Hotpoint WMF720: F-11 error code.

Roy22 wrote:

Is there anyway your software could be wrong?

Well, if I had to put money on it, I would back the official Indesit Company software ( its not mine ) as opposed to an online spares web site. :rolls:

PM me your e-mail address and I will send you a nice picture. 😉

[iadom]

Re: Hotpoint WMF720: F-11 error code.

Just had a look at the wiring diagrams, the model with the R suffix (EVO 2 software), has different wiring connections to the one with the RAsuffix(Arcadia software).

Therefore it would not be wise to fit the wrong pressure switch.

[Author]

Posts