Kitchenfitters tricks!

Home Forums General Trade Forum Kitchenfitters tricks!

Viewing 5 posts - 46 through 50 (of 50 total)
  • Author
    Posts
  • #222381
    richardable
    Participant

    Re: Kitchenfitters tricks!

    as above re fridge and freezer side by side. also as above the two were metal tied together, screws put in before the worktop was laid. told cust…get them back…he rang me 2weeks later…fitters gone bust…when he rang other fitters they of course were terribly sympathetic but eventually after nearly 4months, during the summer without a fridge he did get someone out..the fitters were too busy fitting more new designer kitchens to bother with someone elses crap! 🙂 😮
    richard

    #222382
    urbantiger
    Participant

    Re: Kitchenfitters tricks!

    Had 2 dishwashers -different houses same fitters -who fitted low worktops
    exact height of the dishwashers with the feet wound right in and then thick tiled floor upto the kickplate.one customer had the floor dug up, all the worktops raised,floor retiled under dishwasher (and washing m/c and fridge ) all at her own expense (fitters had gone bust-surprise surprise)
    the other one is just waiting until her w/m goes wrong and going without the dishwasher.

    #222383
    maltheviking
    Participant

    Re: Kitchenfitters tricks!

    Had one today, attended a WM in a new half fitted kitchen, fitters were not there today 😉 Mal had a field day pointing out to customer what they had done wrong 😈 and believe me they have made a right bollox up 😆 😆 Just hope that they learn from their mistakes :rolls:

    #222384
    cornwell40
    Participant

    Re: Kitchenfitters tricks!

    Not kitchen fitter but it could have been. I kid you not about this, on Monday I refused to work on an integrated Diplo dishwasher fitted in a cabinet……………….on top of the worksurface, with nothing holding the machine down for door counterbalance 😯 . Oh and the washer and dryer …..were freestanding underneath :rolls: .I have photos but not sure how to upload them to the site.
    Her mother explained her ex husband had installed it like that.

    Tony C

    #222385
    kwatt
    Keymaster

    Hi Tony,

    If you email the pics to me I can upload to the UKW server or you can use Putfile or something of that ilk.

    K.

Viewing 5 posts - 46 through 50 (of 50 total)
  • You must be logged in to reply to this topic.