Matrix Dishwashers?

[gegsy]

Re: Matrix Dishwashers?

Hi
Had the pleasure of working on one of these today.
Customer used it for 1st time and blew the trip.
Heater unit u/s.
It looks like a cross between haier,smeg and ariston (lovely blend…NOT)

Greg

[mbdas]

Re: Matrix Dishwashers?

haier chaps,
had a call last week to a Haier d/w machine 2-3years old spent one whole hour or more trying to get it out, normal thing new laminated floor fitted right up to kick board.After removing kick board (had worse)adjusted front feet up pulled d/w forwards and got it half way out and machine stopped, electrical cable was run under d/w between front and rear feet went to adjust rear feet up this was done from the front, a small 1/4″ bar runs from the front to a mechanism which moves the rear feet up and down good idea until the plastic cogs in the mech breaks what a job i had lay on my back sawing the metal feet to get it out
Also had one a few years back when a GAS pipe was run under the d/w between the front and rear feet!

Mark

[kwatt]

Ah so kitchen fitters are muppets wherever you go! 😉

K.

[BobHope]

Re: Matrix Dishwashers?

while on the subject anyone found a tool to redo the hose clips on these appliances.

Cheers Bob.

[Penguin45]

Latch-over locking rings? 90o internal circlip pliers will do it. Make sure the ring is fully round before refitting.

Chris.

[Author]

Posts