sept 2010 meeting

[Steven]

Re: sept 2010 meeting

Be great to catch up with Del again, seems like ages since he showed up at a meet 😀

Now Adrian are you not talking to me 😥 :rolls:

I have sent you a couple of emails with my number to get in touch 😆

If you are going up Thursday Pm do you want come via M4 over Severn bridge could meet at Aust services or somewhere to car share 😉

and offers for anyone else coming through Bristol/Glos M4/M5 way and staying till Sat Am, do our bit for the enviro 😆

Can discuss arrangments time etc later if interested.

Steven

[Dales-Electronic]

Re: sept 2010 meeting

The following have been invited to the meeting, if you have extras you want inviting let me know –

Tony Games – Hoover/Candy
Mark How – BSH
Danny Mallinder – Liebherr
Dave Heighton – ISDAL
Carl Nickling – Samsung
Steve Ellison – Glen Dimplex
Pete Austin – LG
Tony – EMW
Graham Dixon – Dixon Training
Graham Chandler – Rangemaster
Quinto – JTM
Suzanne Cherry – SMEG
Jo Loach – NESN
Karl Eaton – Lokring
Steve Richardson – FisherPaykel
Maria Abbott – D&G
Chris Brandon – DR Cooker Hoods
Paul Greenberg – JTM
Simon Freear – Amica
D Marriot – SEME-Nedis
Steve Hodgson – Indesit
Paul White – Capita (Gas Safe)
Duncan Yellen – F-Gas
Eddie Maughan – QER
S Flint – Masterfix
Bill Miller – Gorenje
Andrew Swarsbrick – Homespares
Steve Aveyard – Crosslee
Dave Parker – Repaircare
Kevin Wheeler – Electrolux
Terry Jackson – Electrolux
Daniel King – IQ Supplies
Phil Page – Qualtex
Brian Cresswell – Masterpart
Bill Hanratty – Fagor/Brandt
John Bainbridge – Portway
Tony Blair – Homes Assistance
Jamie Williams – DAD
Ken Hart – Beko

Ian

[Steven]

Re: sept 2010 meeting

I have invited Swift Electrical.

They have a large range of appliances especially on the Amica?

They are interested and will confirm if they want to just watch or promote the services.

Steven

[Dales-Electronic]

Re: sept 2010 meeting

Can you get them to RSVP with numbers please Steve

[Steven]

Re: sept 2010 meeting

Hi Guys

I have had a reply from Malcolm Scott Commercial director, see his email reply below.

He is prepared to do small formal presentation if we want and also wants to know list of members to know which area mangers it will benefit.

I would imagine its a general mix?

What would you like me to tell him?

Hi Steve,

As Chairman of the KBSA (Kitchen and Bathroom Specialists Association) http://www.kbsa.org.uk I am always keen to support any industry trade associations and will be happy to come along on the 24th of September. While Swift Electrical have a full freestanding appliances offering, we are also experts on built in appliances. I am happy to come along and meet people, or to do a few minutes of formal presentation about Swift specifically or the built in market generally – what ever suits the format of your day. If it is of use, I am happy to bring along one or more of our Area Managers. Could you send over a members list to enable me to work out which Area Managers would benefit most.

We offer a fitting service to our house builder customers – all sub contracted to local fitters and we do sometimes get asked for spares, so looking at your web site, there may be quite a lot of opportunity.

Regards

Malcolm Scott

Commercial Director,

Swift Electrical.

[VillageIdiot2]

Re: sept 2010 meeting

I’d just get the head chief there? Trying to get people to say who’s interested will get you a list of about 2 people at this stage, BUT, with a room full of people, he can speak to whoever and then go back and pass details on to Area Managers etc if ya get me?

Nice work though Steven, I’ll definately speak to him 🙂

Ade 🙂

[Steven]

Re: sept 2010 meeting

With the long list of other suppliers coming; have we got space for a short presentation.
I think he is interested in doing a quick talk ❗

Have we got an agenda yet ❓

How much time can we give them ❓

Steven

[kwatt]

Re: sept 2010 meeting

So far, I think we have….

Intro by Lawrence and Ian

Me, Bob2

John Hopwood

Simon Freear (Amica)

Phil Hulme (Qualtex) dunno if they want a slot, will have more end of week

Distributors (appliance) break it up how you like

Open floor for questions but I think with a twist, do one before lunch as well.

No doubt RC will get mentioned.

Can’t recall much else at the minute. Once we know what all’s there then you can form up an agenda.

K.

[Steven]

Re: sept 2010 meeting

I know some manufactures suppliers have paid for lunch / food etc at past meetings.

As a matter of interest; do they offer to sponser the day or do you ask them?

Steven

[kwatt]

As the old saying goes… if you don’t ask, you don’t get. 😉

K.

[VillageIdiot2]

Re: sept 2010 meeting

I might ask Mark if RC can take some of the ‘Touring Car’ budget to pay for our rooms 😆

[Steven]

Re: sept 2010 meeting

Hi Guys

I have had a reply from swift.

Reserve an afternoon slot for 20 mins presentation please

and book 3 persons

He has also offered £200 in to the kitty.:D 😉

HTH

Steven

Hi Steve,

I will keep to 20 minutes with the option of extending this as long as you need by having questions or expanding the talk on the day as needed.

I will sort £200 from the following towards your costs, Swift Electrical, Bosch, Indesit, GDHA. I.E. £50 from each. This will come from the Swift Electrical advertising support budgets for each brand, so you can still ask any of these companies for support directly if you wish.

I will ask Paul Harper and Simon Beard – our Central ASM to join us.

Regards

Malcolm

[VillageIdiot2]

Re: sept 2010 meeting

Nice one Steven 😀

£200 in the kitty… Good work 🙂

I had no luck with RC donation 😆

Looking forward to meeting this guy Steven… :tup:

And yes… I like using Emocicons! 😆

[Dales-Electronic]

Re: sept 2010 meeting

Gents – Can we please try and not overlap it makes us look incompetent. By all means invite your chosen companies but not the ones that I have already invited – having got the yes from them kindly let me know who is coming or at least how many. Equally, I will let you know who has indicated that they are coming

[admin]

Re: sept 2010 meeting

I have Supa trak coming to demonstrate the vehicle tracking system on the day.

Bryan

[Author]

Posts