[ajohnson]

Re: AEG ÖKO LAVAMAT 74639-W (PNC 914 002 162 03)

It worked!

First I manually drained the drum after some minutes on the same time, and the countdown started again. Then I cleaned the bellows and hoses, and did a 95 deg run with vinegar in the soap drawer.

Runs like a charm!

Thanks, mate!

arne

[ajohnson]

Re: AEG ÖKO LAVAMAT 74639-W (PNC 914 002 162 03)

Hey, Washman!

Thanks for the reply!

No, as the machine goes from start to end with the 72630-CPU I ruled out the hose blockage. Maybe a little quick on that assumption..
The pump runs good and sprays water into the drum, but the machine doesn’t change out the water. As I drain the machine the water is very dirty.

I will open up and flush the hoses tonight, and get back with results..

A reconfiguration of the CPU, will that be a service workshop procedure using a computer, or is it a combination to be done at the dashboard?

Cheers,

arne

[ajohnson]

Re: AEG ÖKO LAVAMAT 74639-W (PNC 914 002 162 03)

I fitted the original CPU again to do some more testing and now the machine starts without the first error. The first time I tried a 40 deg run it stopped with the error code E20. I rinsed the pump filter and started the 40deg run again and this time it has a stange error:

The machine starts and runs about 30 minutes and keeps running, but the timer stops counting down. This occurs in all the programs..

Is this a knowm error that can be repaired..?

Cheers,
arne

[Author]

Posts