fennyapps

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 43 total)
1 2 3
  • Author
    Posts
  • December 2, 2011 at 11:38 am in reply to: AEG D8100-1M Double Oven #364673
    fennyapps
    Participant

    Re: AEG D8100-1M Double Oven

    Yep the fan is coming on. Once the cooker is reset it works perfectly for a bit then re occurs.

    Thanks
    Paul

    February 27, 2009 at 5:36 pm in reply to: Indesit WIE127 Stuck in Test Mode #278678
    fennyapps
    Participant

    Re: Indesit WIE127 Stuck in Test Mode

    Cheers guys will give these a try.

    Hopefully one will get it of Test

    Regards
    Paul

    March 13, 2008 at 6:07 pm in reply to: TDS disc #233907
    fennyapps
    Participant

    Re: TDS disc

    Please remember to uninstall any previous editions of TDS before installing the latest as they are complete discs and not just updates of information.
    NOTE: TDS Offline 2008 is the last DVD that will be produced.

    Best Regards
    Paul

    March 13, 2008 at 5:55 pm in reply to: Indest W133 bearing kit #245752
    fennyapps
    Participant

    Re: Indest W133 bearing kit

    C00203002 should be the one required
    6205 + 6206 bearings for this kit

    probably cheaper to buy bearing seperatley and by gen seal c00082696
    But i guess you would need to check on the inner bearing first.

    C00203004 is the 26mm kit

    Regards
    Paul

    November 13, 2007 at 5:09 pm in reply to: Electrolux EW1252F wiring table needed #233091
    fennyapps
    Participant

    Re: Electrolux EW1252F wiring table needed

    No Docs on this one i’m afraid. Have direct procorner access nothing listed for 02 version.
    Can Do Version 03 though!!

    regards
    Paul

    October 9, 2007 at 4:32 pm in reply to: zanussi f/f zx99/5s1 928405933 #230288
    fennyapps
    Participant

    Re: zanussi f/f zx99/5s1 928405933

    Manual says Blinking equals NTC failure.
    PM me your email address & i will hapily send what i have.
    Regards
    Paul

    August 8, 2007 at 1:27 pm in reply to: belling spark generator #223578
    fennyapps
    Participant

    Re: belling spark generator

    Do you have any Numbers on the generator?

    Paul

    July 20, 2007 at 4:39 pm in reply to: Miele W754 #221684
    fennyapps
    Participant

    Re: Miele W754

    europart/maddocks 18-ml-10

    MLE06816000 connect or GSK610

    by the looks of it Merv

    Regards
    Paul

    July 19, 2007 at 4:09 pm in reply to: Crusader CT30V heater #221676
    fennyapps
    Participant

    Re: Crusader CT30V heater

    i have them as the same part mate!!!!!
    no alternatives either.

    regards
    paul

    July 19, 2007 at 4:02 pm in reply to: Zanussi FLE1215W #221618
    fennyapps
    Participant

    Re: Zanussi FLE1215W

    check your inbox

    Regards
    Paul 😀

    July 19, 2007 at 1:46 pm in reply to: Miele W404 Door Seal #221505
    fennyapps
    Participant

    Re: Miele W404 Door Seal

    Cheers Chris 😀

    December 28, 2006 at 2:40 pm in reply to: zanussi ZJ1217 configuration #181256
    fennyapps
    Participant

    Re: zanussi ZJ1217 configuration

    You need to check your Model No: DDSDDS

    product No: would be useful

    Regards
    Paul

    December 28, 2006 at 2:36 pm in reply to: zanussi module configuration #172948
    fennyapps
    Participant

    Re: zanussi module configuration

    TDS is the information dvd from the Electrolux group.

    Offline information of all current Machines with all the info you need.

    Costs around £20 + VAT its a must have DDSDDS

    Regards
    Paul

    August 14, 2006 at 12:01 pm in reply to: Indesit Oven FM20 K.C IXGB #185002
    fennyapps
    Participant

    Re: Indesit Oven FM20 K.C IXGB

    Merloni Part No: C00081591 or mer081591 connect dist

    hope this helps

    Regards
    Paul

    April 12, 2006 at 12:50 pm in reply to: zanussi module configuration #172944
    fennyapps
    Participant

    Re: zanussi module configuration

    Post your email address or send it to me and i will copy you the files required.

    Regards
    Paul 😉

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 43 total)
1 2 3