Forum Replies Created
-
Posts
-
Re: Polly
Have we tried asking BSH for diagnostics?? We could prod BSH-MAN and see what gives 😕
Greg
Re: Polly
BSH will give info willy nilly.
They will even supply wiring diagrams etc to public.
Ive seen the info thats been sent to joe and its pretty trade stuff.
Miele on the other hand are non existent in information release to non own engineers/partners.Greg
PS – Who is Polly 😕 8)
Re: Recommend a Movie
ALL Back to the futures, ALL American Pie, ALL Scary Movie (2 is the best), Blazing Saddles,Kellys Heroes.
Greg
Re: Bosch wfl2462gb problem
Hi
I would start by checking the motor carbon brushes 😉
They should be approc 1.5 inch in length.
Unplug appliance if you are to investigate :plug:Greg
Re: Location of defrost sensor SR-S2028cvw
Hi
http://www.ukwhitegoods.co.uk/modules.p … pic&t=4360 para 5Greg
Re: COMET vs CURRYS
Penguin45 wrote:MacMini will have conniptions……..
You can get cream from doc for that 😆
Greg
Re: Executive Decision
Thats a very kind gesture again Ken, if Im able to make it or not I will advise Tracey.
Thank you again.Greg
Re: Beeping Bosch!!!
Hi
Hope this helps..The signal for the “Option buttons” can be switched on and off. This requires that the programme selector is set to “coloureds 30 °C” and simultaneously that the “Start” button is pressed and hold down. When the signal sounds, the setting has been stored into the memory. The volume cannot be adjusted. When an additional function is switched on, a long acoustic signal sounds; when the function is switched off, the acoustic signal is short.
The signal for the programme versions can be switched off before the programme starts and at the end of the programme or set to a different volume. This requires the “Intensive”(Quick) button is pressed and hold down. Release the button at the required volume, the setting has been stored into the memory.
Greg
