Aeg D/W F35020VI Anti flood

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Aeg D/W F35020VI Anti flood

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 22, 2021 at 3:36 pm #100055
    subs
    Participant

    91153904302
    Program starts then after a couple of seconds the flooded base error starts. 3 flashes and continuous draining. Seems to be a fault with the float micro switch but am wondering if it could’ve damaged the board.
    When I test the switch it’s open circuit until I press the button but then gives fluctuating readings. I’ve tested the machine with switch disconnected (open circuit) and connected and it still activates the flooded base error when you start the program starts after a few seconds either way. I’ve checked for broken wires. Board?

    Thanks

    Subs

    September 22, 2021 at 5:30 pm #479060
    electrofix
    Moderator

    list of poss faults are

    Dave

    September 23, 2021 at 7:28 am #479061
    subs
    Participant

    Thanks for this Dave.
    Ive covered everything on the list so Its looking like the board.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.