Electrolux washing machine inlet hose

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Electrolux washing machine inlet hose

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 3, 2021 at 6:40 am #100092
    FettlingFiona
    Participant

    I’ve moved into a new flat and bought an Electrolux washing machine (John Lewis white labeled it). The kitchen is small and I am struggling to fit the inlet hose as the safety valve (anti flood) doesn’t fit behind the pipes. My question is: do I need to use this specific pipe? If I used a “normal” one (without the valve) would I be damaging the machine? Hope you can help. Fiona

    October 3, 2021 at 8:29 am #479197
    electrofix
    Moderator

    any inlet pipe will do

    the valve on the pipe is a safety device in case either the hose bursts or the inlet valve in the machine sticks open

    its set only to allow a certain quantity of water flow out of the tap before it stops the flow

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.