- This topic has 4 replies, 2 voices, and was last updated 4 years, 5 months ago by
.
-
Posts
-
I’ve read through the 7 pages of a previous problem on here, like this but this is different……..
This machine will start on any setting, fills up then before it turns or heats the display shuts down and it just sits there…… if you turn it off then & back on again it lights up straight away and you can start it up again…. then it does the same thing??
The cx complaint was actually “with 6mins left it made a few awful banging noises and stopped” …… I haven’t got that far yet…..
I’ve tested the heater and motor, both seem good, so I’m thinking its the main board as it’s doing something really strange?
Any ideas please?
Thankselectrofix wrote:when you say dead is that all lights off / no power at all
Dave
Yes about 5mins into any program the machine just shuts off, no lights, no sound…. must still have power going to it though because if you press the power button it comes back to life….. very strange?
well it does sound like a board power supply issue. it sounds like it try to heat and dies
does it work on a rinse programme when there is no heat
have you checked heater for earth problems
if all fails you could try changing the board power supply chip
Dave
- You must be logged in to reply to this topic.