Hoover dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover dryer

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • October 31, 2021 at 12:04 pm #100193
    dopper
    Participant

    its a vtc591b seems to work ok empty, but when wet load in,runs about 5 mins and clicks off, start button flashes no pause, its hot and steamy inside, press start again it will go for a sec only, not blocked
    Any pointers
    thanks

    October 31, 2021 at 12:54 pm #479677
    electrofix
    Moderator

    are you sure the condenser is not blocked shine a light through it to check

    Dave

    October 31, 2021 at 2:58 pm #479678
    kaibart
    Moderator

    Ahrer with dave on this try on timed dry if it’s the same will definitely be blocked condenser or air flow issue

    November 3, 2021 at 7:54 am #479679
    dopper
    Participant

    Hi its not blocked as can see my hand down it, and it was on a timed 60 min

    November 3, 2021 at 9:44 am #479680
    electrofix
    Moderator

    are the drum seals ok ?

    was thinking condensation in the case as it only seems to happen with wet clothes in

    Dave

    November 3, 2021 at 5:39 pm #479681
    dopper
    Participant

    Hi going to strip it down so will check
    Thanks

    November 4, 2021 at 4:42 pm #479682
    dopper
    Participant

    Condenser is clear, i put it in a test mode think this code be a fault code? 3h lit 6h not 9h lit and the lights under ,1st one lit 2nd lit 3rd not, anyone got fault codes?
    Thanks

    November 5, 2021 at 12:09 am #479683
    electrofix
    Moderator

    have emailed what i think are the fault codes

    dave

    November 10, 2021 at 6:24 pm #479684
    dopper
    Participant

    Thanks for the codes, it wouldn’t do anything after putting in test mode, turned out to be the board, working good now
    Thanks for the help

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.