- This topic has 6 replies, 2 voices, and was last updated 4 years, 4 months ago by
.
-
Posts
-
This dishwasher is 11 years old and has been faultless until now.
The auto programme lasts 2hrs 30 according to the dash on the inside, but once the various cycles have concluded the programme seems to ‘hang’ in the final drying phase.
Same thing on shorter programmes e.g. glass. I come back to the dishwasher long after the programme should have finished and the dishwasher should have turned itself off, to find the red indicator light still on and about fifteen minutes still to go.
Dishes are still perfectly cleaned, water is heating as normal, no other warning signs.
I’ve tried all the usual things of several rounds of dishwasher cleaner, citric acid, and cleaned the filters regularly and often (they’re spotless anyway). I now do a three second reset every time to complete the programme, but I’d rather the thing worked as designed.
What should I investigate? Many thanks in advance
It occurred to me that it might be the door lock problem occurring when the hot rinse phase of the programme causes thermal expansion. Is that plausible?
Thanks Dave I know I can close the door but I haven’t waited for the programme to finish. I’ll do some checking
Update: mid-cycle the control panel now only shows a simultaneously flashing red light on the symbols of the tap and rinse aid. It won’t reset, either
if another member has Bosch tech access they may be able to advise but Bosch wont tell you what this means and i have no idea
Dave
- You must be logged in to reply to this topic.