- This topic has 6 replies, 2 voices, and was last updated 4 years, 4 months ago by
.
-
Posts
-
I’m currently using a Hotpoint H7T 911T MX H, everything was working well until a week ago there was an intermittent power outages and all of sudden my Fridge section is now stuck at 5° temperature, if set it to 2°c or 7°c it doesn’t work but temperature control displays all right.
when you set it at another temp does it
A not work at at all and get warmer till it reaches room temp
B stays at 5 degrees
your description was not very specific
Dave
well that sounds like a board or control issue
try turning off then give it 2 or 3 mins then turn on. these units are effectivly a computer so thinking a total controlled re boot may help
Dave
does sound like a control board issue
bad news, these boards need to be programmed. it may just need re programming or need replacing
you cant buy a pre programmed board so its a manufacturer only fit or someone who has bought the programming gear
Dave
- You must be logged in to reply to this topic.