Beko 81241 stopping after 2 minutes

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko 81241 stopping after 2 minutes

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 4, 2022 at 8:34 am #100706
    Wheezie67
    Participant

    Beko wmb 81241 LW

    I put it on the 39 minute cycle but it stops at 37 minutes. I’ve tried the 7 second single button reset but it made np difference.

    I don’t know where to start looking so any help is much appreciated

    Thank you

    April 4, 2022 at 8:53 am #481828
    electrofix
    Moderator

    what does it do before it stops ?

    Dave

    April 4, 2022 at 9:04 am #481829
    Wheezie67
    Participant

    It hums then sounds like it’s about to fill but just halts at 37 minutes

    April 4, 2022 at 9:06 am #481830
    electrofix
    Moderator

    and if you leave it do any fault codes come up ?

    Dave

    April 4, 2022 at 11:24 am #481831
    Wheezie67
    Participant

    No I’m afraid not Dave. It just displays 37 minutes on the LCD. It does start to fill then clicks n stops at 37 minutes

    April 4, 2022 at 12:06 pm #481832
    electrofix
    Moderator

    ok first thing to check is the motor brushes

    Dave

    April 7, 2022 at 7:20 pm #481833
    Wheezie67
    Participant

    Ok I’ve successfully changed the brushes and it seems to run through all the test cycle but now the LCD flashes like it’s changing programs all the time

    April 7, 2022 at 7:27 pm #481834
    electrofix
    Moderator

    when does it flash ?

    Dave

    April 7, 2022 at 8:03 pm #481835
    Wheezie67
    Participant

    When you select a program using the roatry dial it seems to display the wrong times and then the times flicker. For exame the quick 39 minute wash flicks between 2:50 and 3:08

    April 7, 2022 at 8:52 pm #481836
    electrofix
    Moderator

    that sounds like the programme selector is dirty. if you can remove the panel and try to get a small amount of WD40 into the switch. dont saturate it just need anough to get inside and work the knob to clean it

    Dave

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.