Beko wm5100w not starting program

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko wm5100w not starting program

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 6, 2022 at 4:11 pm #100716
    Adam Fyfe
    Participant

    Hi, I have this washer and it’s been great.

    now, when pressing the start button it begins to fill. Stops then fills again, then just stops. It never progresses.

    if I cancel the program holding the start button it drains and goes back to idle.

    any ideas ?

    thanks

    April 6, 2022 at 6:02 pm #481879
    tubafan
    Participant

    Sounds like it’s waiting for the motor to start, which I assume doesn’t happen?

    April 6, 2022 at 6:17 pm #481880
    Adam Fyfe
    Participant

    No, no motor noise nothing

    I’ve checked all cables are in their correct places.

    April 6, 2022 at 9:12 pm #481881
    electrofix
    Moderator

    have you checked the motor brushes ?

    Dave

    April 8, 2022 at 6:50 am #481882
    andyjawa
    Participant

    Yes it`ll surely be the motor brushes. Well worth repairing this machine and so well worth the effort to have a good look. These simple Beko entry level machines can be very long lasting and reliable.

    April 9, 2022 at 3:01 pm #481883
    Adam Fyfe
    Participant

    It was indeed the brushes !!

    new ones installed and it’s working like a charm

    thank you. !

    April 15, 2022 at 7:44 am #481884
    andyjawa
    Participant

    Great. You are advised to run the brushes in by doing a couple of light loads first so that a “curve” on each brush running face angle beds in properly.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.