AEG Micromat microwave oven

Home › Forums › Public Support Forums › Help And Support › Other Appliances › AEG Micromat microwave oven

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 11, 2022 at 7:39 am #100807
    Norman
    Participant

    Hello, first post, suspect not the last as everything is getting older, including me!

    My query concerns my AEG Micromat m/w oven, fitted above the AEG oven and grill. Over 30 years old now. The light inside hasn’t worked for some time, and i have absolutely no idea how to access the bulb holder. A kitchen fitter couldn’t help either (he was changing a ring under the AEG hob) so I am hoping someone here has a simple answer. Many many thanks in advance.

    Regards,
    Norman.

    May 11, 2022 at 8:41 am #482271
    electrofix
    Moderator

    will need a model no and if poss the Pnc number off the label

    Dave

    May 14, 2022 at 8:38 am #482272
    Norman
    Participant

    Hi, the microwave is a Micromat 115/125/135 850W (E) is all I can tell you.

    May 14, 2022 at 10:06 am #482273
    electrofix
    Moderator

    need more then that
    most often there is a label inside the door right hamd side stuck to the side of the control panel

    Dave

    May 14, 2022 at 11:01 am #482274
    Norman
    Participant

    Dave, many thanks for your replies, but I’ve given all the info I have. I just wonder if there is a generic AEG “this may be the way to do it” ?

    May 14, 2022 at 11:22 am #482275
    electrofix
    Moderator

    a lot of units you have to acess the light from inside the case which also put you at risk of high voltage electric shocks even when the unit is unplugged unless you know how to discharge the high voltage capacitor

    there must me more informaion on it somewhere. none of those numbers are a model or Pnc number. both of which would be on the machine somewhere

    Dave

    May 14, 2022 at 11:51 am #482276
    Norman
    Participant

    Thanks Dave,

    Looks like an AEG engineer call out imminent as its obviously got to come out of the housing. Cheers.

    May 14, 2022 at 12:39 pm #482277
    electrofix
    Moderator

    you should be able to find an independant engineer who would not be as expensive as the manufacturer

    also some lamps for AEG miscrowaves are expensive as i have noe recently where the lamp is over £40

    that why i needed more info to look it up

    Dave

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.