- This topic has 8 replies, 3 voices, and was last updated 20 years, 10 months ago by
.
-
Posts
-
Hello im having a problem with my indesit w12s
The program dial is continuosly turning all the time and wont finish the cycle
Any ideas.Andrew
Re: indesit w12s
The indicator lamp will also be flashing, if you count the number of times this, (in theory at least) indicates an error code.
Dave.
Re: indesit w12s
Water level control problem then as long as the code is accurate which they often aren’t 😕
Possibly the pressure switch but I would recommend you call an engineer to verify this, check repairs@ and the directories for one.
If you are to investigate further yourself, unplug 1st :plug:
Dave.
Re: indesit w12s
so were would i find these switches would they be around the drum,
thanks for the help so far
AndrewRe: indesit w12s
whitter wrote:so were would i find these switches would they be around the drum,
It’s the water level control you need look for. (A Pressure switch connected to a thin black rubber hose) That hose or switch may be your problem??
:plug: No peeking without cutting the power though, …..promise me? :zap:
Re: indesit w12s
whitter wrote:Damn the screws on the back appear to be torq style screw heads
Darn!…now what 😆
Re: indesit w12s
Great got one got the top off
Looking inside…
The only black rubber hose is a small 10mm style size tube on the right of the drum, its connected to what appears to be a white type of switch with a few wires connected to it, at the moment i cannot see where the bottom of this tube leads to somewhere at the bottom of the drum??Andrew
- You must be logged in to reply to this topic.