- This topic has 7 replies, 6 voices, and was last updated 3 years, 7 months ago by
.
-
Posts
-
Hi, been out to Beko wdix8543100 with no motor action, no fault codes, fills empties, drum has a lot of resistance unless motor unplugged, anything I can try to establish if motor or motor board? Thanks Allan
I have never come across a Beko washing machine with a failed inverter motor (except some early motors which had on-board electronics), but many times a failed inverter board, particularly on Beko.
With the power off unplug the motor then test the resistance between the 3 wires coming to the motor from the inverter (not the motor), if you get a low resistance or short then it is a faulty inverter board.
It is also a rarity for a inverter driven motor to electrically fail as they don’t have any moving electrical components but it is common for the circuit baords that drive them to fail – this applies to all makes.Jem
electrofix wrote:have emailed the trouble shoot guide
Dave
Any chance you could fire this over to me too please, got one to go to and be nice to be able to narrow it down to either board or motor.
- You must be logged in to reply to this topic.