Hoover DynamicNEXT

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hoover DynamicNEXT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 20, 2022 at 7:24 pm #101270
    Deet27
    Participant

    Whilst using the Tumble Dryer there was a bang and it tripped the Circuit Breaker. Reset the Circuit Breaker and machine powers on but is not working.

    When you select program and then press start you hear a click from the front panel and after a few seconds the time on the time remaining display starts flashing. Not seeing any error codes.

    I have checked:-
    Drum moves freely and belt is intact .
    When starting machine I have tried to gently move drum in case a Capacitor issue but doesn’t start turning.

    I have noticed that when I removed the Condenser there is a burnt plastic smell.

    Any advise or what to check would be appreciated.

    Deet

    October 20, 2022 at 8:24 pm #484118
    don
    Moderator

    Can you post up the model and serial number please 🙂

    Don

    October 21, 2022 at 10:04 am #484119
    Deet27
    Participant

    Mod : DXC9DG-80
    SN: 3110087219351362
    Regards

    October 22, 2022 at 6:03 am #484120
    Inverappin
    Participant

    Switch off power, take lid off and check wiring to PCB. Prone to melting at the heater connection. And rarely, if the heater has been changed recently, check wiring coming into machine from heater. Seen it get tangled around motor/pulleys.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.