Hoover condenser e11 fault

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hoover condenser e11 fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 21, 2022 at 12:37 pm #101273
    Jasonwhitegoods
    Participant

    Hi.. hoping someone may be able to help me with an error code.
    Hover condenser dryer Model DX C9TCER-80
    s/n 3110105519130097

    The dryer starts fine, heats up, and errors out after approx 5 minutes with E11
    It’s hot in the drum, I’ve so far checked and cleaned the condenser, checked and cleaned filters.. airflow appears good coming from lower fan.. I’ve replaced the ntc/thermistor at the front of the appliance, and checked wiring to the ntc..
    Heater element looks fine as do the thermostats on the heater box. Done insulation test on appliance, no earth leakage..
    Now I’m lost on it!!
    Any more suggestions??
    Any help much appreciated
    Regards
    Jason

    October 21, 2022 at 6:54 pm #484133
    electrofix
    Moderator

    comes up as this

    Dave

    October 21, 2022 at 7:12 pm #484134
    Jasonwhitegoods
    Participant

    electrofix wrote:comes up as this

    Dave

    Thanks for the reply Dave, I’ll get into the fan and check.. airflow seamed fine but will check and report back

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.