Flavel Dishwasher – Lights come on and then just goes dead

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Flavel Dishwasher – Lights come on and then just goes dead

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 30, 2022 at 11:16 am #101295
    rayjdav
    Participant

    Hello all,
    I have a Flavel FDW64 dishwasher.
    Worked perfect until 2 days ago. Now, when I go to set the cycle, control panel is not activating.
    I have disconnected it to see if it is a socket issue but when I switch the socket on, the machine beeps, lights flash, so there is power getting to it.
    But then when I try to set a cycle, nothing. I press the left on/off button, nothing.
    Is there anything I can try to see if it will work or is it a case of replace. Cost of d/washer v spares, not really worth it.
    I did not notice any strange noises previously to let me know of failing pump etc…

    And help appreciated.

    Thanks

    October 30, 2022 at 8:42 pm #484220
    electrofix
    Moderator

    well these faults can be a problem

    check the wiring from the door control to the board. remove any plugs and replace

    if it works then ok if not it can be

    either board or the cable joining the two

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.