DIAGNOSTIC / RESET MODE FOR ZANUSSI FJS 1225 W AND WJD 1667

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DIAGNOSTIC / RESET MODE FOR ZANUSSI FJS 1225 W AND WJD 1667

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 15, 2005 at 10:33 pm #10138
    FLORIN
    Participant

    Hi everybody ,

    I need to know what can I do, to get in the diagnostic mode of the machine , and then to reset the eventual error that has occured?

    June 15, 2005 at 11:44 pm #138543
    Dave_Conway
    Participant

    Re: DIAGNOSTIC / RESET MODE FOR ZANUSSI FJS 1225 W AND WJD 1

    Florin, can you post the PNC(s) and I should be able to dig out the info for you 😀

    Dave.

    June 16, 2005 at 9:07 pm #138544
    Flyman
    Participant

    Re: DIAGNOSTIC / RESET MODE FOR ZANUSSI FJS 1225 W AND WJD 1

    Switch machine off. Press and hold START and SKIP/RESET buttons while switching machine on. After about 4 seconds the machine will bleep, release the two buttons. All of the lights will flash around in sequence. Press the fabric button 9 times and you should have the last stored error code. To exit the fault system press the Temperature button a couple of times then switch machine off then on then off again. When you switch back on it will probably display EE0, switch off again then back on and you will be back to normal use. 🙂

    June 16, 2005 at 11:35 pm #138545
    Penguin45
    Participant

    Re: DIAGNOSTIC / RESET MODE FOR ZANUSSI FJS 1225 W AND WJD 1

    What Florin needs is a copy of TDS sending to Romania…..

    Ideas anyone?

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.