Indesit single oven FM31KAX

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit single oven FM31KAX

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • December 2, 2022 at 7:50 pm #101428
    rocker
    Participant

    I ordered a new set of door hinges for this oven..when sliding the lower hinge into the slot, the locking clip would go flat enough to close the door !!.. ..I cant see why..as they are the correct part also checked with original ones exactly the same…anyone had this problem .

    December 3, 2022 at 12:14 am #484695
    electrofix
    Moderator

    a lot of the later ones i find need to be tapped down as they are quite stiff

    Dave

    December 3, 2022 at 9:37 am #484696
    rocker
    Participant

    Thanks for reply,,tried but unable to tap down as they are too long won’t go..

    December 3, 2022 at 9:42 am #484697
    electrofix
    Moderator

    cant find that model no

    have you got full model and commercial codes

    Dave

    December 3, 2022 at 9:44 am #484698
    rocker
    Participant

    Don’t know if it matters but the numbers stamped on the hinges are different on the new ones.. ie… old ones 06.16 new ones 09.16

    December 3, 2022 at 9:56 am #484699
    electrofix
    Moderator

    they may have changed the hinges during a run

    let me have model and commercial codes and the part number of the hinges you have been sold

    Dave

    December 3, 2022 at 11:18 am #484700
    rocker
    Participant

    Hi Dave. Model No FIM31KAIXGB S/n 609158506 Com No 25793500300

    December 3, 2022 at 11:22 am #484701
    electrofix
    Moderator

    i get part no

    C00268747

    what did you get ?

    Dave

    December 3, 2022 at 2:20 pm #484702
    rocker
    Participant

    thats what I have but confused as they differently don’t fit..the pushdown lugs are hitting the frame of body so unable to force them down..may have to grind them down to fit..no other answer…thanks for you help..John

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.