- This topic has 2 replies, 3 voices, and was last updated 3 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Tested this washer and does the load dance for 2 minutes then aborts with ie showing. Checked valve solenoids, all ok. Doesn’t give any power to the valve at all before it aborts so I’m presuming a PCB fault which is discontinued. Any other possibilities which I’ve missed as I’m a bit lost on LG D.D stuff.:(
Tony
tech info on these is almost non existant and changing a board, and your wrong, is a real pain not to mention costly
check the machine pumps as on some machines an open circuit pump stop filling
also check heater for earth faults, bit of a long shot but stranger things happen
Dave
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.