Fitting new door to beko dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Fitting new door to beko dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 3, 2023 at 5:55 pm #101538
    Bob Blake
    Participant

    I need to fit a new door to a used BEKO DIN28Q20 dishwasher. I have all the bits except I have no template to guide where exactly i need to place the door and make the screw holes. All the Youtube guides assume the machine is new and the paper templates are available. I have also searched for templates without success. Any ideas how I can get the replacement door to fit perfectly?

    January 3, 2023 at 7:32 pm #485157
    electrofix
    Moderator

    you can do it by just measurement

    you have the plastic frame. it has to be central left to right all you need is the vertical

    clip frame into door, then measure from the screw holes to the top of the control panel

    then make same measurement on the door panel. put 2 screws each side and try to see if it fits

    if ok fit all screws

    Dave

    January 3, 2023 at 10:52 pm #485158
    Bob Blake
    Participant

    Thanks for the tip Dave. I will give it a try.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.